Secure LoRaWAN Concentrator Card – Dev Preview


Secure LoRaWAN Concentrator Card DEVELOPER PREVIEW.

SKU: N/A Category:


This is a Secure LoRaWAN Concentrator Card DEVELOPER PREVIEW.


Developer Preview is intended for hardware/software developers. This card is fully functional and exactly the same as the finalized hardware EXCEPT it comes shipped with unlocked firmware.

Gateway Compatibility

This hardware is pin-compatible with many LoRaWAN Gateways including RAK/MNTD, Helium OG, Nebra, SenseCap, Controllino/Conelcom, Pisces, Linxdot CM4, Pycom, Cotx, Syncrobit, Panther X1, Finestra/Mimiq, Rising HF, Midas, etc. If you are unsure if this card will work with your gateway, please ask. You can also DIY Hotspot with a Raspberry PI and RAK 2287 PI Hat Adapter.


  • Built on the SX1303 baseband processor
  • Tx power up to 27dBm, Rx sensitivity down to -139dBm@SF12, BW 125 kHz
  • Built-in ZOE-M8Q GPS module
  • mPCIe form factor (compatible with most LoRaWAN Gateways)

GPS Antenna

Secure Concentrator requires an active GPS antenna. We recommend using our external GPS antenna because we have thoroughly tested and confident with its performance. However, any active GPS antenna operating between 3-5 volts and under 10mA should work.


Additional information

Weight 3 oz
Dimensions 5 × 3 × 2 in

915Mhz, 868Mhz